Tom handlekurv
Her er du: Forside > Diverse komponenter > Kontrollere > Kontrollere > LYCOM PCI-Express SATA II Int. 2port

Vennligst vent...

Finn
blekk og toner
Finn
prosjektorlampen
Finn
kabelen
Finn
generelt tilbehør

Rett i postkassen

Meld deg på for å motta spesialtilbud og nyheter per epost

Kontrollere

Du må logge inn for å handle/se priser.
LYCOM PCI-Express SATA II Int. 2port (PE-103R5)

LYCOM PCI-Express SATA II Int. 2port (PE-103R5)


Varenr.: PE-103R5
Porter/kontakter: SATA
Eksterne porter: Nei
Grensesnitt: PCI-E
Interne porter: Ja
RAID: Ja
Beskrivelse

PE-103R5
RAID5 SATA II – 3Gbps Internal Dual Ports PCI-Express Host (Raid 5, 0, 1,10 & JBOD)

FEATURES

  • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
  • Supports 1-lane 2.5Gbps PCI Express
  • Hot-plug capability
  • Supports SATA II transfer rate of 3.0Gbps
  • Fully compliant with Serial ATA 1.0 specifications
  • Supports two independent Serial ATA channels
  • Independent Link, Transport, and data FIFO
  • Independent command fetch, scatter/gather, and command execution
  • Supports Legacy Command Queuing (LCQ)
  • Supports Native Command Queuing (NCQ)
  • Supports Non-zero offsets NCQ
  • Supports Out of order data delivery NCQ
  • Supports FIS-based switching with Port Multipliers
  • 31 Commands and Scatter/Gather Tables per Port
  • Two Pin headers on board for LED connection
  • RAID 5 (Distributed Parity RAID) has Highest Read data transaction rate and Good aggregate transfer rate
  • Raid 5 requires Port Multiplier and 3rd Drive
  • JBOD is a virtual disk that combines all disk drives as one entire disk drive
  • Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
  • Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
  • RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
  • Completely with drivers for Windows 2000 ,XP and 2003 Server
  • Supports 64bit / 32bit Windows Vista
  • Linux 32bit / 64bit drivers supported for RHEL 4.0 Up2, RHEL 4.0 Up3, SuSE 9.0 SP2, SuSE 9.0 SP3 by SiliconImage SiI3132.
  • Mac OS X v10.4 Non-booting driver supported by SiliconImage SiI3132
  • Chipset : SiI3132
  • Fully RoHS compliant

2Ports 3Gbps SATA II PCI Express 1X host board to support NCQ, Port Multiplier, Raid5, Raid10, Raid0, Raid1 and JBOD!

RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping), RAID 5 (Distributed Parity RAID) and JBOD (Just Bunch of Disks) manage multiple disk drives to enhance I/O performance and provide redundancy in order to withstand the failure of any individual member, without the loss of data.

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.